CROSSER
HOME PAGE PRODUCTION COMPANY COMPANY’S NEWS FOR PARTNERS AND CLIENTS USEFUL INFORMATION CONTACTS

Snow- throwers

   
Mini tractors
Tillers
Snow-throwers
Trimmers
Petrol-powered saws
Electric generators
Motor pumps
High-pressure washers
Dusters
Attached implements
Engines
Spare parts
   
 
Snow-throwers CROSSER CR-SN-1

Snow-throwers CR-SN-1

Motor: Zongshen
Type of motor: four-stroke, OHV
Power: 6.5 hp / 4 kW
Cylinder capacity: 196 cm3
Engine starting: manual
Cleaned band width: 600 mm
Snow cover thickness: 510 mm
Discharge distance: 0-8 m
Size of wheels: 13
Fuel tank capacity: 3,6 litre
Weight: 90 kg
Package size: 97 × 66 × 76 cm
The price can be asked
 
 

The self-propelled wheeled snow-remover Crosser CR-SN-1 is intended for the use at small and medium areas. Being propelled by a one-cylinder four-stroke engine (power of 6.5 hp) and equipped with the metallic cogged snow auger, it can fight either the new-fallen loose snow or the heavy and packed snow.

The engine can work at low temperatures and can start even at very low temperatures (below zero). The rotary chute discharges the snow in the necessary direction. The discharge direction can be changed. The pneumatic tires with special treads prevent the skidding even on the ice.

 
 
Snow-throwers CROSSER CCR-SN-2

Snow-throwers CR-SN-2

Motor: Zongshen

Type of motor:

four-stroke, OHV

Power:

6.5hp / 4 kW

Cylinder capacity:

196 cm3

Engine starting:

manual / electric starter, all-mains, 220 V

Cleaned band width:

600 mm

Snow cover thickness:

510 mm

Discharge distance:

0-8 m

Size of wheels:

13

Fuel tank capacity:

3.6 litre

Weight:

91 kg

Package size:

97 × 66 × 76 cm

The price can be asked
 
 

The snow-throwers CR-SN-2 are very efficient thanks to their special engines, which can work at very low temperatures (below zero) and are notable for their stable operation even in winter. The engine having the power of 6.5 hp (4.8 kW) copes perfectly with its tasks. The engine has also and electric starter. A powerful two-section auger crushes the packed snow and discharges it to the distance of 15 meters through the chute. Two speeds (forward and reverse) enable to cope with the new-fallen loose snow at higher speed or to use all power of engine on removing the packed snow at lower speed.

The special rubber wheels having a high roadability prevent the slipping even on the ice. The following controls are at the control panel: speed governor, separate clutch control lever and the shifting lever controlling the auger. There is also a special blade to remove the snow remaining at the auger. The regulator of the snow discharge direction (right or left) is also at the front control panel.

 
 
Snow-throwers CROSSER CR-SN-3

Snow-throwers CR-SN-3

Motor: Zongshen

Type of motor:

four-stroke, OHV

Power:

11 hp / 8.2 kW

Cylinder capacity:

337 cm3

Engine start:

all-mains, 220 V

Cleaned band width:

710 mm

Snow cover thickness:

510 mm

Discharge distance:

0-10 m

Size of wheels:

15

Headlight for the work at night:

available

Fuel tank capacity:

6.5 litre

Weight:

123 kg

Package size:

97 × 66 × 76 cm

The price can be asked
 
 

The snow-thrower CROSSER CR-SN-2 picks up, crushes the packed snow and ice with the powerful two-section metallic auger, and delivers them to the special impeller, by which they are milled and discharged through the chute. The discharge clutch can turn around, and its direction can be changed by the operator with so-called “Joystick” at the control panel.
The engine of the snow-thrower  CR-SN-3 (power of 11 bhp) has an electric starter. Thanks to the overhead valves, the engine can work even at very low ambient temperatures (below zero). It has a great range of operating speeds (6 forward and 2 reverse). You can remove the new-fallen loose snow at higher speeds, and as to the packed snow and ice, it is recommended to crush them at lower speeds.
The track-type snow-thrower Crosser CR-SN-3 has a special lever enabling to transfer the center of gravity of the machine. When it is necessary to remove the new-fallen and loose snow, the snow-remover is in normal position, and its weight is distributed uniformly enabling you to work easily. On moving the lever backwards, you transfer the center of gravity forward and can remove the heavy packed snow without mounting on top of the snowdrift. In transport position, you move the lever forward on transferring the center of gravity backwards Such option can be used, in case it is necessary to remove the gravel.

The folding handles minimize the storage space. The snow-thrower  is delivered with a special blade enabling you to clean the chute.
 
 
Snow-throwers CROSSER CR-SN-4

Snow-throwers CR-SN-4

Motor: Zongshen

Type of motor:

four-stroke, OHV

Power:

11 hp / 8.2 kW

Cylinder capacity:

337 cm3

Engine starting:

all-mains, 220 V

Cleaned band width:

710 mm

Snow cover thickness:

510 mm

Discharge distance:

0-10 m

Headlight for the work at night:

available

Fuel tank capacity:

6.5 litre

Weight:

132 kg

Package size:

97 × 66 × 76 cm

The price can be asked
 
 

Crosser CR-SN-4 is the model of winter 2010-2011. It is equipped with all components necessary to work in unfavorable conditions. A professional engine with the overhead valve (OHV) is made especially for the stable work at low ambient temperatures. It starts easily at very low temperatures (below zero) even with the use of the manual starter (cord), and on using the electric starter, you can do it without any trouble.
The snow-thrower CROSSER CR-SN-4 has a gear box with eight speeds (6 forward and 2 reverse) enabling you to choose the necessary mode of auger operation and the rate of snow--remover movement. At low speeds, you can remove the packed snow and snowdrifts, even covered with ice, and at high speeds, you will easily cope with the new-fallen loose snow.

The auger can remove snow cover 53 cm thick and the band 84 cm large. Thanks to the possibility to unblock the differential gearing of wheels the turning radius of such enough heavy machines is amounted practically to nothing on facilitating the maneuverability manifold! A halogen headlight enables you to work without any trouble at nighttime, and it is very important in winter. The discharge clutch can turn around, and its direction can be changed by the operator with so-called “Joystick” at the control panel. Large tires with strong treads prevent the snow-thrower skidding even on the ice. A great fuel tank increases the active time of work without refueling.
 
 
Snow-thrower CROSSER CR-SN-5

Snow-thrower CR-SN-5

Motor:

Zoncin, Snow series

Type of motor:

four-stroke, OHV

Power:

9 hp

Cylinder capacity:

265 cm3

Fuel tank capacity:

4 litre

Lubricating oil volume:

0.95 litre

Snow cover thickness:

51 cm

Cleaned band width:

74 cm

Discharge distance:

13 m

Size of wheels:

16"

Engine starting:

all-mains, 220 V

Unblocking of wheels for rotational motion:

cam holders

Discharge chute control:

through the control panel

Headlight for the work at night:

available

Handle heating:

available

Weight:

111 kg

Package size:

106 × 82 × 84.5 cm

The price can be asked
 
 

The snow-throwers Crosser are intended for the use at any territories. Being propelled by the four-stroke one cylinder engines (power of 9 h.p) of Snow series, such machines can cope with either the new-fallen loose snow or the packed snow without any trouble. The engines of snow-throwers Crosser have independent control levers enabling to manage separately the throttle and air choke. Their engines can easily start at very low ambient temperatures. The model is equipped with an electric starter. The proprietary transmission Disc-o-Matic enables to choose a speed necessary to settle any problem: seven speeds (5 forward and 2 reverse) are foreseen for such purpose. The packed snow and snowdrifts are removed at low speeds, the new-fallen snow is removed at medium speeds, and the high speeds are more convenient for transportation. The width of the cleaned band is equal to 74 cm. To facilitate the manipulation it is possible to unblock the differential gearing of wheels: if it is necessary to turn the machine, one wheel is disconnected from the motor, and the machine turns around under own power. The X-track tires with strong treads insure a good cross-country ability and reduce the probability of skidding. The operator (user) can change the snow discharge direction and distance and control other operations on using the control panel. The discharging chute can turn around.
The steel cogged snow auger insures more efficient crushing of the ice crust and packed snow. It consists of two independent spirals having large working faces insuring a high efficiency and enabling to continue the work, if even a “finger” of one spirals if cut off. The maximum distance of the snow discharge is equal to 13 meters. On expecting that the snow-remover can be used at night, its manufacturers have supplied it with the headlight. The heated handles protect the operator’s hands against frost.

Made with the use of modern technologies and high grade materials the snow-removers CROSSER have longer warranty lifetime. The distinguishing features of the snow-removers CROSSER are their components and utilities of high quality as well assemblage. Therefore, they will faithfully serve their owners.
 
 
Snow-thrower CROSSER CR-SN-5-1

Snow-thrower CR-SN-5-1

Motor:

Zoncin Snow series

Type of motor:

four-stroke, OHV

Power:

9 hp

Cylinder capacity:

265 cm3

Fuel tank capacity:

4 litre

Lubricating oil volume:

0.95 litre

Snow cover thickness:

51 cm

Cleaned band width:

74 cm

Discharge distance:

13 m

Size of wheels:

track

Engine starting:

all-mains, 220 V

Unblocking of wheels for rotational motion:

cam holders

Discharge chute control:

through the control panel

Headlight for the work at night:

available

Handle heating:

available

Weight:

125 kg

Package size:

106 × 82 × 84.5 cm

The price can be asked
 
 

The snow-throwers CROSSER are intended for the use at any territories. Being propelled by the four-stroke one cylinder engines (power of 9 hp) of Snow series, such machines can cope with either the new-fallen loose snow or the packed snow without any trouble. The engines of snow-throwers Crosser have independent control levers enabling to control separately the throttle and air choke. Their engines can easily start even at very low ambient temperatures. The engine can easily start even at very low ambient temperatures. The model is equipped with an electric starter. The proprietary transmission Disc-o-Matic enables to choose a speed necessary to settle any problem: seven speeds (5 forward and 2 reverse) are foreseen for such purpose. The packed snow and snowdrifts are removed at low speeds, the new-fallen snow is removed at medium speeds, and the high speeds are more convenient for transportation. The width of the cleaned band is equal to 74 cm. To facilitate the manipulation it is possible to unblock the differential gearing of wheels: if it is necessary to turn the machine, one wheel is disconnected from the motor, and the machine turns around under own power. The X-track tires with strong treads insure a good cross-country ability and reduce the probability of skidding. Another important feature of the machine is the center of gravity transfer system. Subject to the service conditions or the problem to be solved, the center of gravity can be transferred. When the snow-remover is in standard position, its weight is distributed uniformly. In case it is necessary to work with the heavy snow, the center of gravity is transferred forward, to the snow auger. In transport position, it is transferred backwards. All controls are before operator, at the control panel. The operator can change the discharge distance and direction. The discharge chute can turn round.
The steel cogged snow auger insures more efficient crushing of the ice crust and packed snow. It consists of two independent spirals having large working faces insuring a high efficiency and enabling to continue the work, if even a “finger” of one spirals if cut off. The maximum distance of the snow discharge is equal to 13 meters. On expecting that the snow-remover can be used at night, its manufacturers have supplied it with the headlight. The heated handles protect the operator’s hands against frost.

Made with the use of modern technologies and high grade materials the snow-removers CROSSER have longer warranty lifetime. The distinguishing features of the snow-removers CROSSER are their components and utilities of high quality as well assemblage. Therefore, they will faithfully serve their owners.
 
 
Snow-thrower CROSSER CR-SN-6

Snow-thrower CR-SN-6

Motor:

Zoncin Snow series

Type of engine:

four-stroke, OHV

Power:

11 hp

Cylinder capacity:

302 cm3

Fuel tank capacity:

4 litre

Lubricating oil volume:

0.95 litre

Snow cover thickness:

51 cm

Cleaned band width:

74 cm

Discharge distance:

13 m

Size of wheels:

16"

Engine starting:

all-mains, 220 V

Unblocking of wheels for rotational motion:

cam holders

Discharge chute control:

through the control panel

Headlight for the work at night:

available

Handle heating:

available

Weight:

125 kg

Package size:

106 × 82 × 84.5 cm

The price can be asked
 
 

The snow-throwers CROSSER are intended for the use at any territories. Being propelled by the four-stroke one cylinder engines (power of 11 hp) of Snow series, Such machines can cope with either the new-fallen loose snow or the packed snow without any trouble. The engines of snow-removers Crosser have independent control levers enabling to control separately the throttle and air choke. Their engines can easily start at very low ambient temperatures. The engine can easily start even at very low ambient temperatures. The model is equipped with an electric starter. The proprietary transmission Disc-o-Matic enables to choose a speed necessary to settle any problem: seven speeds (5 forward and 2 reverse) are foreseen for such purpose. The packed snow and snowdrifts are removed at low speeds, the new-fallen snow is removed at medium speeds, and the high speeds are more convenient for transportation. The width of the cleaned band is equal to 74 cm. To facilitate the manipulation it is possible to unblock the differential gearing of wheels: if it is necessary to turn the machine, one wheel is disconnected from the motor, and the machine turns around under own power. The X-track tires with strong treads insure a good cross-country ability and reduce the probability of skidding. The operator (user) can change the snow discharge direction and distance and control other operations on using the control panel. The discharging chute can turn around.
The steel cogged snow auger insures more efficient crushing of the ice crust and packed snow. It consists of two independent spirals having large working faces insuring a high efficiency and enabling to continue the work, if even a “finger” of one spirals if cut off. The maximum distance of the snow discharge is equal to 13 meters. On expecting that the snow-remover can be used at night, its manufacturers have supplied it with the headlight. The heated handles protect the operator’s hands against frost.

Made with the use of modern technologies and high grade materials the snow-removers CROSSER have longer warranty lifetime. The distinguishing features of the snow-removers CROSSER are their components and utilities of high quality as well assemblage. Therefore, they will faithfully serve their owners.
 
 
Snow thrower CROSSER CR-SN-6-1

Snow thrower CR-SN-6-1

Motor:

Zoncin Snow series

Type of motor:

four-stroke, OHV

Power:

11 hp

Cylinder capacity:

302 cm3

Fuel tank capacity:

4 litre

Lubricating oil volume:

0.95 litre

Snow cover thickness:

51 cm

Cleaned band width:

74 cm

Discharge distance:

13 m

Size of wheels:

track

Engine starting:

all-mains, 220 V

Unblocking of wheels for rotational motion:

Cam holders

Discharge chute control:

through the control panel

Headlight for the work at night:

Available

Handle heating:

Available

Weight:

125 kg

Package size:

106 × 82 × 84.5 cm

The price can be asked
 
 

The snow-throwers Crosser are intended for the use at any territories. Being propelled by the four-stroke one cylinder engines (power of 11 hp) of Snow series, Such machines can cope with either the new-fallen loose snow or the packed snow without any trouble. The engines of snow-removers Crosser have independent control levers enabling to manage separately the throttle and air choke. Their engines can easily start at very low ambient temperatures. The model is equipped with an electric starter. The proprietary transmission Disc-o-Matic enables to choose a speed necessary to settle any problem: seven speeds (5 forward and 2 reverse) are foreseen for such purpose. The packed snow and snowdrifts are removed at low speeds, the new-fallen snow is removed at medium speeds, and the high speeds are more convenient for transportation. The width of the cleaned band is equal to 74 cm. To facilitate the manipulation it is possible to unblock the differential gearing of wheels: if it is necessary to turn the machine, one wheel is disconnected from the motor, and the machine turns around under own power. The X-track tires with strong treads insure a good cross-country ability and reduce the probability of skidding. The operator (user) can change the snow discharge direction and distance and control other operation on using the control panel. The discharging chute can turn around.
Another important feature of the machine is the center of gravity transfer system. Subject to the service conditions, the center of gravity can be transferred. When the snow-remover is in standard position, its weight is distributed uniformly. In case it is necessary to work with the heavy snow, the center of gravity is transferred forward, to the snow auger. In transport position, it is transferred backwards. All controls are before operator, at the control panel. The operator can change the discharge distance and direction. The discharge chute can turn round.
The steel cogged snow auger insures more efficient crushing of the ice crust and packed snow. It consists of two independent spirals having large working faces insuring a high efficiency and enabling to continue the work, if even a “finger” of one spirals if cut off. The maximum distance of the snow discharge is equal to 13 meters. On expecting that the snow-remover can be used at night, its manufacturers have supplied it with the headlight. The heated handles protect the operator’s hands against frost.

Made with the use of modern technologies and high grade materials the snow-removers CROSSER have longer warranty lifetime. The distinguishing features of the snow-removers CROSSER are their components and utilities of high quality as well assemblage. Therefore, they will faithfully serve their owners.
 
 
Snow-thrower CROSSER CR-SN-7

Snow-thrower CR-SN-7

Motor:

Zoncin Snow series

Type of motor:

four-stroke, OHV

Power:

13 h.p

Cylinder capacity:

375 cm3

Fuel tank capacity:

5.5 litre

Lubricating oil volume:

1.1 litre

Snow cover thickness:

51 cm

Cleaned band width:

74 cm

Discharge distance:

13 m

Size of wheels:

16"

Engine starting:

all-mains, 220 V

Unblocking of wheels for rotational motion:

cam holders

Discharge chute control:

through the control panel

Headlight for the work at night:

available

Handle heating:

available

Weight:

129 kg

Package size:

106 × 82 × 84.5 cm

The price can be asked
 
 

Snow-throwers Crosser are intended for use at any territories. Being propelled by the four-stroke one-cylinder engine of Snow series (power of 13 hp), the machine can easily remove new-fallen loose snow as well the packed snow. The engines of snow-removers Crosser have independent control levers enabling to manage separately the throttle and air choke. Having electric starters, they can start without any problems even at very low ambient temperatures. The proprietary transmission Disc-o-Matic enables to choose a speed necessary to settle any problem: seven speeds (5 forward and 2 reverse) are foreseen for such purpose. The packed snow and snowdrifts are removed at low speeds, the new-fallen snow is removed at medium speeds, and the high speeds are more convenient for transportation. The cleaned band width is equal to 74 centimeters.
To facilitate the manipulation it is possible to unblock the differential gearing of wheels: if it is necessary to turn the machine, one wheel is disconnected from the motor, and the machine turns around under own power. The X-track tires with strong treads insure a good cross-country ability and reduce the probability of skidding. The operator (user) can change the snow discharge direction and distance and manage other operation on using the control panel. The discharging chute can turn around.
The steel cogged snow auger insures more efficient crushing of the ice crust and packed snow. It consists of two independent spirals having large working faces insuring a high efficiency and enabling to continue the work, if even a “finger” of one spirals if cut off. The maximum distance of the snow discharge is equal to 13 meters. On expecting that the snow-remover can be used at night, its manufacturers have supplied it with the headlight. The heated handles protect the operator’s hands against frost.


Made with the use of modern technologies and high grade materials the snow-removers CROSSER have longer warranty lifetime. The distinguishing features of the snow-removers CROSSER are their components and utilities of high quality as well assemblage. Therefore, they will faithfully serve their owners.
 
 
Snow-thrower CROSSER CR-SN-8

Snow-thrower CR-SN-8

Motor:

Zoncin Snow series

Type of motor:

four-stroke, OHV

Power:

13 hp

Cylinder capacity:

375 cm3

Fuel tank capacity:

5.5 litre

Lubricating oil volume:

1.1 litre

Snow cover thickness:

51 cm

Cleaned band width:

74 cm

Discharge distance::

13 m

Size of wheels:

Crawls

Engine starting:

all-mains, 220 V

Unblocking of wheels for rotational motion:

cam holders

Snow-discharging chute control:

from the control panel

Headlight for the work at night:

available

Handle heating:

available

Weight:

129 kg

Package size:

106 × 82 × 84,5 cm

The price can be asked
 
 

The snow-throwers CROSSER are machines to be used at small and large areas. Propelled the one-cylinder four-stroke engine Snow having the power of 13 hp, they can fight either the new-fallen loose or the heavy and packed snow. The throttle and choke plates have their separate controls. The motor can be without any problems started cold. The model has an electric starter. The proprietary transmission Disc-o-Matic enables to choose a speed necessary to settle any problem: seven speeds (5 forward and 2 reverse) are foreseen for such purpose. The packed snow and snowdrifts are removed at low speeds, the new-fallen snow is removed at medium speeds, and the high speeds are more convenient for transportation. The cleaned band width is equal to 74 centimeters.
To facilitate the manipulation it is possible to unblock the differential gearing of wheels: if it is necessary to turn the machine, one wheel is disconnected from the motor, and the machine turns around under own power. The X-track tires with strong treads insure a good cross-country ability and reduce the probability of skidding. Another important feature of the machine is the center of gravity transfer system. Subject to the service conditions, the center of gravity can be transferred. When the snow-remover is in standard position, its weight is distributed uniformly. In case it is necessary to work with the heavy snow, the center of gravity is transferred forward, to the snow auger. In transport position, it is transferred backwards. All controls are before operator, at the control panel. The operator can change the discharge distance and direction. The discharge chute can turn round.
The steel cogged snow auger insures more efficient crushing of the ice crust and packed snow. It consists of two independent spirals having large working faces insuring a high efficiency and enabling to continue the work, if even a “finger” of one spirals if cut off. The maximum distance of the snow discharge is equal to 13 meters. On expecting that the snow-remover can be used at night, its manufacturers have supplied it with the headlight. The heated handles protect the operator’s hands against frost.

Made with the use of modern technologies and high grade materials the snow-removers CROSSER have longer warranty lifetime. The distinguishing features of the snow-removers CROSSER are their components and utilities of high quality as well assemblage. Therefore, they will faithfully serve their owners.
 

Contact us

To ask interesting questions, to receive consultation or issue the order you can at the manager of corporate department by phone:

+971 4 2268161


Send the message


About the brand CROSSER


It has shown itself to good advantage in Eastern Europe, countries of Asia and Middle East.


About the Company and products

For Partners


We offer to commercial companies favorable conditions of delivery of our products.


For Partners and Clients